The Fire or Flame Sensor Module can detect flames in the 760 – 1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum.
An on-board LM393 op-amp is used as a comparator to adjust the sensitivity level. The sensor has a digital and analog output and sensitivity can be adjusted via the blue potentiometer.
This Flame Sensor Module is used to detect fire/flame source or other light sources of the wavelength in the range of 760nm – 1100 nm. It is based on the YG1006 sensor which is a high speed and high sensitive NPN silicon phototransistor. Due to its black epoxy, the sensor is sensitive to infrared radiation.
The sensor can be a great addition in a firefighting robot, it can be used as a robot eyes to find the fire source. When the sensor detects flame the Signal LED will light up and the D0 pin goes LOW.
The module has 2 outputs: Analogue, which gives a real-time voltage output signal on thermal resistance, and digital which allows temperature thresholds to be set via a potentiometer.
Features :
Specifications:
|
Operating Voltage(VDC) |
3.3 to 5 |
|
Spectrum range |
760nm ~ 1100nm |
|
Detection Angle(°) |
0 to 60 |
|
Operating Temperature (°C) |
-25 to +85 |
|
Length (mm) |
35.5 |
|
Width (mm) |
15.2 |
|
Height (mm) |
14 |
|
Weight (gm) |
3 |
Package Includes :
| SKU | 0779 |
|---|---|
| Category | Module |
| Availability |
The Fire or Flame Sensor Module can detect flames in the 760 1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor…
| In stock |
No reviews yet — be the first to review this product.
No questions yet — ask the first one below.
